Brief Summary
This video provides a step-by-step guide on how to diagnose and replace a faulty oven heating element. The presenter demonstrates how to identify a malfunctioning element, test it with a multimeter, find the correct replacement part using the oven's model number, and install the new element. Key steps include safely accessing the element, testing for continuity, and ensuring proper reconnection.
- Diagnosing a faulty oven heating element.
- Testing the element with a multimeter for continuity.
- Finding the correct replacement part using the oven's model number.
- Step-by-step instructions for safely replacing the element.
Identifying a Malfunctioning Oven Element
The video starts by addressing the issue of an oven that takes an extended time to preheat or cook. The presenter demonstrates that the lower heating element, which should glow bright red during preheating, does not activate when the oven is turned on to 350 degrees. This indicates a potential problem with the element.
Accessing and Removing the Oven Element
To access the heating element, the oven racks are first removed. The presenter explains that ovens typically have two elements: an upper element used mainly for broiling and a lower element used for baking and preheating. The lower element is suspected to be the cause of the problem. The presenter removes two screws holding the element in place and carefully pulls the element out, exposing the spade connectors on the backside.
Testing the Element for Continuity
The presenter emphasizes the importance of noting the position of the connectors (white on the right, yellow on the left in this case) before disconnecting them. With the element removed, a multimeter set to the continuity setting is used to test the element. The multimeter should produce a chime if the element has continuity, indicating a complete circuit. The absence of a chime confirms that the element is faulty and needs replacement.
Finding the Replacement Part
To find the correct replacement element, the oven's model number, typically found inside the oven behind the door panel, is needed. The presenter uses the model number to search online for the part number, using resources like Repair Clinic to find OEM parts and instructions. They also check Amazon for potentially cheaper and faster shipping options. The presenter mentions that links to help find the correct element will be provided in the description and pinned comment.
Installing the New Element
Before installation, the new element is tested with the multimeter to ensure it has continuity. The spade connectors are then reattached to the new element, ensuring they are in the correct positions (white on the right, yellow on the left). The element is carefully pushed back into the oven, making sure the feet of the element sit properly. The two screws are reinserted to secure the element in place.
Testing the Repaired Oven
After reinstalling the new element, the oven is turned on to the bake setting to test if the element glows orange or red, indicating it is working correctly. The presenter confirms that the element is now glowing, signifying that the issue has been resolved. Further testing will be done to ensure the oven preheats and cooks properly.
