HOW TO Descale the Delonghi Magnifica Evo Next

0:00 In this video, I'm going to show you how to descale the Dongi Magnifica Evo. Next, I'm going to try to show you as shortly and succinctly as I can. Now, first of all, I've got the descaler right here. This is the Dongi descaler. I do recommend you use the Dongi descaler so that you have the right concentration and the right kind of descaling liquid. Now, let's take a look. All right, so you can see it's telling me it's time to descale. Ready to start? 25 minutes it should take. Okay, let's do it. So, it's going to guide me through it. First of all, we have to empty the drip tray and grounds container. Okay, we can move on. Please empty the water tank.

0:45 All right, time to move on. Add the long scaler up to level A and top up with water up to level B. So, here's level A, and we're filling up to level B. It's important to fill up to the right levels. Place 2 L container under both spouts. Ready? Let's go. [Music] All right. Now, this process is going to take a while for it to run through all the descaler. We'll see you in a little bit when it's all finished. By the way, why are we descaling? Well, water has a

1:32 ton of minerals in it. And if you don't descale, if you don't break up and extrude those minerals out of the tubing lines in the machine, you can render the machine useless. Just take a look at what it does here to our water kettle. My goodness. So, that is the reason that you have to this scale. Do it on a regular basis and your machine will last a long time. And by the way, guys, if you're getting any value out of this video, do me two favors. Number one, give it a like. And number two, subscribe to the video so I know to make more like this in the future. Okay, step six. We got to rinse the water tank and fill it up to level max. First, we got to dump our scaling solution. [Music]

2:22 And now we're going to fill it to level max right here. This is important to make sure that we get enough water to rinse all the way through or it might request you to do it again. I would also suggest making sure there's nothing here in the drip tray before we proceed. I also like to support this with a sponge and we can go on to the next step to rinse. All right, now it's finally finished rinsing with water. So, it says time to fill the fresh time to fill the water tank with fresh water. But first, we got

3:07 to dump our rinse water here. So, that out of the way to make sure to dump out the drip tray because it does also rinse a bit into the drip tray as you can see there. Okay. So, now it is time to refill the tank again with water up to the max level. Okay, I did it. Let's place our container under the spouts again and go for our second rinse. Okay, our second rinse is finished. So, let's empty that. Now, it's asking, can you empty the drip tray? Let's do it.

3:57 Please insert grounds, container, and drip tray. All righty. Did it. Good. Dcale completed. We did it. And next, we just have to fill up the tank with fresh water. So for this I use Brida filtered water since I need Brida filtered water anyway for my water kettle. [Applause] Okay, so for the fresh filtered water, you just got to make sure that that sensor there, the flow sensor has been raised. And I'll stick that back in the machine. It's at this point, by the way, that you could also put a water filter in there if you're going to buy water filters from Dongi, but I filter my water first. Okay, good to go. All right, so there we

4:45 are, guys. We got the machine all this scaled. It's going to be good to go for the future. Ready to rock for more coffees. Hope you guys have a good day. And if you need to look for any of this stuff, this discaler or whatever, I will put some links in the description box down below. Have a good day, guys. Bye now.